17 October 2016

How to make simple Saree Petticoat?

Saree Petticoat Pattern
Saree petticoat is a simple long skirt with an adjustable drawstring at waist. Petticoat is a must when wearing a saree as it contributes to it's overall drape. Frill is stitched to the hem of petticoat to give a fuller shape at the bottom of saree. As petticoat goes underneath the saree, it's colour should match the saree's base colour. Length of the petticoat should be an inch shorter than your saree length. Fabric used for making a petticoat should be light in weight, easy on the skin and durable. Cotton, polyester-cotton, satin or silk fabrics can be used to make a petticoat. Type of fabric used to make a petticoat should be selected based on the saree material. Petticoat can be called as an 'underskirt for saree'.

I have shown pattern making of a very basic Saree Petticoat which has six panels and a waist band to insert drawstring. If you are beginner prefer using pure cotton fabric for making this petticoat. Length of fabric should be 2.5 meters and width can be 36" (for Small / Medium size) & 44" (for Large / XL size).
Measurements required: (in inches)
- Low Round waist (it is measured from 1½" below the naval point).
- Round Hips (hips should usually be measured 6 to 8" lower to waist)
- Petticoat length (should be an inch shorter than your saree length)
- Waist band width = 6"
How to make simple Saree Petticoat?
Steps for drafting Six Pieces / Panels:
- A-B = Petticoat length – Waist band width (i.e. 6") .
- Mark point D on A-B such that A-D = 6" or 7" or 8" (this is waist to hip distance and it varies depending on Small / Medium / Large hip size).
- Draw perpendiculars from A, D and B
- A-F = 1/8 low round waist +1/2"
- A-C = go down by 1/2"
- D-E = 1/8 round hip + 1/2"
- Join F-E with slant line & extend down to meet the perpendicular drawn from B at G.
- G-H = go up on slant line by 1/2"
- Shape C-F and B-H with slight curve.
- Cut paper pattern along C-B-H and F (i.e. cut along blue inked markings).

Drafting of Waist band:
- After you have stitched the 6 panels of petticoat, measure the round waist and make above given draft of waist band.
- A-C & B-D = Waist band width is 6"
- A-B & C-D = Petticoat Round waist + 2"

Some Tips:- when preparing the fabric for draft placement & cutting:--
1) If using basic woven cotton material, then straighten the fabric by slightly stretching it diagonally to align the warp & weft at right angle.
2) Iron the fabric always to make it crease free prior to marking / placing the draft over it.
3) If you are a beginner, prefer making the draft on paper and then pin it to fabric.

*I have also shown how to lay the draft on fabric in above image.

I hope this post was helpful to you.
Please leave your valuable comments / queries and I will be happy to reply.☺☺

If you enjoyed this post, I’d be very grateful if you’d help it spread by emailing it to a friend, or sharing it on Twitter or Facebook. Thank you!

Stay connected on 
Facebook / Pinterest / Twitter / 

**********************

2 comments:

  1. Thank you for sharing an important blog of how to make a petticoat. Try ready made saree petticoat.

    ReplyDelete
    Replies
    1. Hi Sonali, thanks for your feedback. Do you want me to explain ready made petticoat pattern?

      Delete

I love hearing from readers of my blog so please feel free to leave a comment and let me know what you thought about this post/tutorial. Any tips / hints to improve my articles are always much appreciated too!

Follow by Email

Contact Form

Name

Email *

Message *